google.com, pub-5618279750012654, DIRECT, f08c47fec0942fa0

How The Worlds Thinnest Watch Was Made

It all started at sihh in 2014, after the successful release of the ultiplano 900p, then the world’s, thinnest watch when one of the marketing team joked with the technical team that they should make a thinner one for next year.

The comment in passing did its intended job of winding up the people who’d, worked so hard on making the 900p, but it also did something else, sowing a seed of thought in their minds. What if they could make a watch even thinner, watchfinder? The pre-owned watch specialist now available in france, germany, switzerland, usa and hong kong, so we can keep on making great watch videos.

I’d, really appreciate it. If you subscribed to the channel, if you already are it really does help? Thank you. You can imagine how that silly little comment got under the skin of the people, whose job it had been for the past few years to engineer the successor to the 1957 caliber 9p.

It was only a joke. After all, some stupid commentary that reflected on the attention. The 900p had garnered at the show, but nevertheless, once that seed was planted, it had nothing left to do but grow and so sketches started appearing quiet conversations, shared mutterings about new ideas and potential challenges, filling the breaks between work and from nothing came something a challenge To make a watch as thin as the movement that got all this started that caliber 9p from 1957.

. Let me repeat that an entire watch as thin as one of the thinnest calibers ever made. We’re, talking two millimeters top to bottom case. Crystal movement dial, hands everything. The 900p was a good start, but as the team would soon come to find going from 3.

65 millimeters to 2 millimeters was going to be much much harder than they ever anticipated. Once the concept was signed off, the team was assembled. This secret skunk works project was built around a core of 10 or so individuals, but with problem after problem arising from the very start to the very end multiple specialists had to be enrolled throughout the development.

This was proper prototyping, a new approach to watchmaking that would have to solve problems. No one had ever encountered before the overall structure was to be fashioned in the same way as the 900p utilizing a monoblock case, whose back would also serve as the movement base plate, but for the design to work.

The case back could be no thicker than 0.12 millimeters, and so the problems began. Gold was, of course, far too soft, but the big issue was that at these dimensions, so was steel. Material engineers were recruited to source a replacement settling on m64 bc, a cobalt alloy with incredible hardness that’s, forged with heat and pressure, an ideal solution, except that none of piaget’s.

Tools worked with it. It was too hard, the equipment had to be updated and even then it frequently broke and where the rubies had been set directly into the case. Back of the 900p, the paper-thin design of this new watch made that impossible cracking jewels, left right and center brass collars had to be handcrafted to fit each case bag and each jewel each and every one unique.

The team would soon discover a pattern here in attempting to build a two millimeter thick watch. It became clear that every single one would have to be custom made to achieve the tolerances required with no one component transferable from watch to watch.

It was less a timepiece and more an f1 engine. This was only the beginning for the next few years. The ultiplano ultimate concept would be what kept engineers lying awake at night, swung moods from soaring peaks to nauseating lows that consumed every waking moment trying to overcome the challenges it left in its wake, and there was one thing that weighed on the mind of every single Person working on the project, they could get 99 of the way to the finish line and hit a problem that rendered the whole thing scrap that very nearly happened there wasn’t.

A single element of this watch that didn’t throw up something. No one had anticipated. There was a plan, of course, but this was uncharted territory, unearthing situations that had never once occurred in watchmaking before to make a two millimeter thick watch.

There were a few key areas identified that would be the make or break for success, and one of them was the crown to allow a crown to switch between winding and setting mode. A 90 degree gear is needed, and that would be too thick.

A winding key was considered, as were two separate crowns, but those ideas felt like avoiding the problem rather than solving it. Brains were racked nails, chewed and coffee, drunk until an idea was hatched, use an infinite screw, a worm gear to transfer the direction of the mechanism.

Instead, it was a great solution, except for the fact that it created even more problems. The crown couldn’t switch from winding to setting in the same way as normal, and so a telescopic crown tube had to be conceived with a ratchet mechanism seated inside the crown itself to indicate the different crown positions.

But there was a much larger problem than that in stress testing. The watch, the infinite screw was wearing down too quickly, and i mean way too quickly. After just two weeks of daily winding it was knackered, they tried resizing it, they tried various coatings, they tried.

Thinking of other solutions to no avail, there was only one thing left to try and that was to develop a custom tool that allowed a watchmaker to hand polish it to a mirror finish, a process that took over five hours for the one screw.

Thankfully, it worked, unfortunately, that watchmaker has to do it again for every single watch. Then there was the balance wheel, getting it thin enough. Wasn’t too difficult, at least relatively speaking, but what happened when it was seated below the crystal was a complete shock to everyone.

As it beat back and forth, it began to speed up losing its timing. The watchmakers discovered that it had become magnetized but had no idea why, on its own, it ran fine, but in the watch the same problem kept happening after a lot more coffee, nail biting and late nights, a thought was occurred upon the balance being barely a hair’s, width from the glass might be generating a static field that was causing the hairspring to bind.

The theory was absolutely right. It’s, just no one had ever seen anything like it before. An anti-static coating was applied to the underside of the crystal, and the problem of weeks was solved, but the crystal itself was to prove to be the final stress that nearly destroyed the entire project.

The watch was almost fully built, stress-tested, kinks, ironed out and in case you’re wondering if it’s likely to bend whilst wearing it. They tested that with a hammer to make sure it won’t that’s, not a joke.

Even the strap is reinforced with kevlar to make sure it’s thin enough and strong enough. All that was left now was to secure the crystal in place permanently, you see being a monoblock case, the hole where the crystal sits is the only entry point, and once the crystal is fixed in position, the watch is sealed.

Adhesive was decided upon for the job and with the sticky liquid applied the 0.2 millimeter thick crystal the thinnest ever made was lowered into place. Fitted fine stayed stuck down. Only problem was that the movement had stopped after a lot of panicking.

It turned out that the adhesive had been compressed and spread into the movement itself, gluing it together. So they tried again this time, machining fine channels into the watch for the adhesive to pull in and keep it from spreading with a sigh of relief.

The watch continued to run now if it goes wrong, an adhesive ruins a watch that took a month to build the watchmaker has no one to blame, but himself. The end result is a watch two millimeters thick 22 grams, including the strap and an experience that has no equal.

This is the very cutting edge of watchmaking so far removed from what you or i are used to that it completely scrambles your brain, trying to comprehend it the product manager who worked on the ultiplano ultimate concept and shared his experiences with me, described, holding the final Product as almost underwhelming, the months and months of stress, to solve problem after problem, resulting in a watch that you can barely even feel – and i completely understand this – is an alien thing – an object that i recognize in part yet have no frame of reference for, in Others that takes watchmaking not to a new level but an entirely new dimension, and you know what i reckon they can make.

It even thinner discover more exceptional watches at watchfinder. Thank you so much for watching this video. If you enjoyed it, please do consider giving it a like and subscribing to the channel. If there are any watches you’d like to see featured, please let us know in the comments below

Source : Youtube
 

 

Changing Trends for Unique Wedding Bands

The custom of wedding event bands goes back a number of hundreds of years. In the current times, an array of impeccably created goods made from alternate metals like titanium as well as tungsten is gradually obtaining importance in the market.

How To Buy Tassel Necklaces From a Wholesaler

Tassel pendants are straightforward pendants that you can quickly make in the house. While there are several kinds of tassel pendants, beaded tassel necklaces are one of the most stunning as well as you can easily make them at home.

What You Need To Know About Tassel Necklaces

Tassels are common in curtains and also lamp shades, today people are using them to develop elegant tassel necklaces. Types Of Tassel Necklaces – There are many sorts of these pendants out there. The most common ones being: Beaded: they are just one of the most usual pendants in the marketplace and also are made from different products.

Alexandrite or Diamond?

It is extremely tough to try to trouble a person a fad when it concerns putting on gems and also accessories in basic. It is extremely individual as choosing your preferred shade. That is why you can not make somebody placed on their hand or neck s jewel that they do not like regardless of that it can be the most fashionable presently. For instance a few years ago it was extremely stylish to use plastic jewels, big plastic beads on your neck and also wrist. However, for a person that is utilized to wearing just silver or gold, this is entirely undesirable.

Demand for Tungsten Wedding Rings Steadily Surging in the Market

An exclusive assortment of developer wedding celebration rings, made from tungsten, is gradually obtaining prominence across the marketplace. The variety of fashion jewelry is much reasonably valued as well as a lot more easily budget-friendly for many.

You May Also Like